The following are sizing and positioning guidelines to help you to select the correct chandelier.
When choosing a chandelier for the dining room: It should neither overpower your table nor look too small. Measure your table (if it’s round, measure its diameter, if it’s a rectangle, measure its width), and then subtract 12″ (30 cm) from that number. For example, if you have a 42″-wide (107 cm) table, your chandelier should be 30″ (76 cm) in diameter. A properly proportioned chandelier comes to within 6″ (15 cm) of each edge of the table. Using this easy formula will help you achieve that balance. Some manufacturers offer oval chandeliers for extra long rectangular tables.

Proper positioning is very important for a balanced look. Since a chandelier is the focal point in your dining room, it should hang over the center of your table. If the electrical connection in your ceiling doesn’t match up with the table’s center, insert a heavy duty decorative hook into the ceiling above the center of the table, then attach a length of decorative chain to carry the wiring from the electrical connection to the hook. The bottom of your chandelier should be 30″ (76 cm) above the tabletop if you have 8′ (2.4 m) ceilings. If your ceilings are higher than 8′, raise the chandelier 3″ (7.5 cm) for every extra foot (30 cm) of height.

Chandeliers for other rooms - the chandelier should be placed higher than 8 feet above the floor in the middle of the room. When placing a majestic chandelier in the foyer, take into consideration the height of the ceiling and size of the space. If there’s a window above the front door, you may want to center it in the window for maximum curb appeal and aesthetics. Optimal placement would be at least 9 feet from the floor.

Information on selecting the correct size fixture

Height - The distance from the top to the bottom of the fixture, not including the chain.

Overall Height - The total length from the top to the bottom of the light, including the chain.

Extra Wire - Every hanging light that we sell comes with more wire than chain.

Diameter - The width of the fixture.

Extension - The distance the fixture comes out from the wall. Top of Fixture to Center of Outlet - The distance between the top of the wall light and where the fixture attaches to the wall.

Visit www.lightingshowplace.com for a wide selection of beautiful chandeliers.

Purchasing a crystal chandelier is similar to buying a diamond. Not all crystal is created equal. Crystal may be machine-cut, hand cut or molded. The cost of your chandelier can fluctuate drastically depending on the quality of crystal you choose. Most fixtures are available in four qualities of crystal.

Lights of Distinction - the Crystorama Lighting Group and James R. Moder are two of the largest manufacturers of Crystal Chandeliers.

Strass Crystal: Strass Crystal is considered the finest in the world. Strass is manufactured by Swarovski AG in the Austrian Alps. Strass is an optically pure crystal, clear as spring water, totally free of flaws, unique in purity and brilliance. Strass crystal is characterized by razor-sharp cutting of facets (surfaces) with the lead content in excess of 30 percent. Cutting and polishing are done by machine to achieve perfect optical clarity. Strass crystals are treated with an invisible coating, which eliminates dust attraction and makes it easier to clean and maintain. Each crystal (over 12mm) has the distinct STRASS® laser engraved signature, identifying it as a genuine STRASS® Crystal .

Swarovski Spectra Crystal: A passion for perfection has made Swarovski the world leader in the production of cut crystal. Swarovski & Co., manufacturer of Strass Crystal, has created a new alternative quality crystal. Swarovski has used advanced technology with olde world knowledge to produce a brilliant crystal with precision cutting and superior light reflection. This crystal type is designed for a crystal connoisseur demanding quality at an affordable price.

Imperial Crystal (Available only through James R Moder): Imperial crystal dressed chandeliers contain brilliant crystals created by precision cutting sourced from Austria , Egypt, Turkey and the Czech Republic. The Imperial crystal is a combination of quality crystals to achieve a great look at an excellent price point.

Regal Crystal (James R Moder) / Majestic Wood Polish Crystal (Crystorama): This crystal is cut by hand in two stages on an iron and then a sandstone wheel. Each crystal is then polished on a wood wheel with marble dust. These methods go back centuries. If you look closely you will notice faint traces of the wood-wheel attesting, the concentrated labor of the artisan. This is a mark of authenticity. Each piece is a unique and original masterpiece.

Italian Crystal: Italian crystal also known as Venetian Crystal (from the glass-making regions in and around Venice ) is molded not cut. You will notice a rounding of edges that comes from fire polishing. Molded crystal, though never as brilliant as cut crystal has a subtle charm and is an exceptional value. It is an ideal budget crystal for heavily dressed chandeliers.

A wide selection of beautiful chandeliers can be found at www.lightingshowplace.com.

Ask Sam, The Service Expert

Q. If my home’s air is uncomfortable, what will you look for?

A. We’ll evaluate your home’s air against many criteria including humidity, moisture, airflow, filtration, ductwork and carbon monoxide using our exclusive Home HealthReport™ Card.

Q. Is humidity that big of a deal?

A. It sure is. Humidity levels affect your comfort and health inside as much as they do outside. Too much can promote mildew growth. Too little can dry skin, make throats sore and cause respiratory problems. In other words, humidity levels need to be balanced in order to feel comfortable at normal temperature settings.

Q. Our basement always seems damp. Does that matter?

A. Yes. It can become a breeding ground for microbes and contaminants that can lead to severe respiratory problems, allergies and even immune system disorders. You may need to put in a moisture barrier and then a dehumidification system.

Q. How does inadequate air flow effect my inside comfort?

A. It can cause poor heating and air conditioning equipment performance or increased energy consumption. It could also lead to things like improper humidity levels, an uncomfortable home and higher utility bills. By measuring your home’s air flow, a NATE-certified technician can determine what changes need to be made in your system to ensure maximum comfort and energy efficiency.

Q. Do I need more than the ’standard’ filter in my furnace?

A. Possibly. Without adequate filtration, expensive heating and cooling equipment can become clogged and lead to decreased efficiency, higher utility costs and potentially expensive repairs. The wrong filter could also cause dust buildup that can make your family susceptible to colds, allergies and respiratory disorders.

Q. I noticed some damage to my ductwork. Is that a problem?

A. Yes. If ducts are damaged or improperly sealed or insulated, they can waste energy and draw pollutants into your home, then distribute them to every room.

Q. How can I protect my family from carbon monoxide?

A. Purchase a carbon monoxide detector. In addition, have your gas appliances checked to determine if theyare properly ventilated.