More people are killed or injured in fires than all the burglaries of homes or businesses combined. Smoke & soot damage will consume every square inch of your home. I had a neighbour who had a fire and clothes packed in suitcases still got damaged with soot. They were far removed from the actual fire. So it is important to add fire protection to your security system.

Most smoke detectors security alarm companies use is different than the ones sold in hardware stores. They measure the quality of the air electronically. They usually can detect a fire as opposed to fumes using this method is much better. When a fire is detected, the fire department is notified even sometimes before you the home owner know you have a fire. The internal siren in the home alerts your family of the fire. Most alarm systems give intermittent short blasts if there is a fire as opposed to a steady sound of the siren. This also lets you know even in a deep sleep that when the siren goes off, you know it’s a fire instead of a break-in.

It is important where you place these devices. Some cities have codes stating you have to have one for each bedroom. Most of the time they are installed in a common hallway outside of the bedrooms.

Another device is called a heat rise or heat sensor. Most of these devices operate sensing the heat of the air surrounding them. There are two kinds. The first device will detect a fire if the heat rises to a certain temperature. The other device will activate if there is a sudden change of temperature from a certain degree to another.

These devices are placed in areas like kitchens, garages, attacks, basements near the furnace, utility rooms, and any where you have a heater or flammable materials.

Every family should have a fire drill every so often. Each member of the family should know all exits. Have a place where you meet outside, like at the mail box, so you know everyone has gotten out. Many people have lost their lives going back into a burning home thinking that someone is still in the home when actually they were out but on the other side of the home.
Keep in mind that most insurance companies give discounts if you have a security system installed in your home or business. The more levels of protection could mean a greater discount on your insurance. So an investment in a complete security system could mean a substantial savings over the years plus the “peace of mind” knowing you’re protected.

Get a FREE* ADT Alarm System worth over $850, with a $99* installation fee, and $ 0 activation fee, 24/7 Immediate Emergency Medical, Police and Fire Response, 2 Way Voice Enabled Control Centre and much more. Please visit: http://www.apexdirect.ca/promos/3 to get a FREE, no obligation Life Safety System quote or call us at 1 888 496 9488

A healthy home is in your hands. Just use the checklists below.

Source Control
The best way to improve the air in your home is to attack problems at the source. The following checklist will help you do just that.

Tips to help control dust and other biological contaminants
*Use a vacuum cleaner with strong suction, and a rotating beater brush to loosen ground-in dirt. Two-ply bags with HEPA filters ensure the dirt stays in the bag.
*Install hard surface coverings on floors, windows and furniture — they help repel dust.
*Avoid pets inside your home. If you wish to keep a pet indoors, make sure it is groomed often and keep it away from carpets, furniture and beds.
*Wash bedding weekly at a hot setting.
*Use hypoallergenic dust covers on your mattress and pillows to deter dust mites and other biological contaminants.

Tips to help control odors, fumes, and gases
*Keep interior doors leading directly into the garage closed. Leave the garage door open at least 5 minutes after a car enters or leaves the garage.
*Extinguish all burning embers in your fireplace before shutting the flue.
*Leave the door open to any room that does not have a return vent.
*Use non-toxic cleaning products. Keep them sealed and store them away from high traffic areas in your home.
*Eliminate tobacco smoke in the home.
*Install and use exhaust fans in the kitchen and bathrooms.

Tips to help control the humidity levels in your home
*Check your home for leaks near windows, doors, attic accesses and dryer vents.
*Ensure your ductwork is inspected and cleaned by a professional.
*Reduce static electricity in your home by installing a humidifier.
*Maintain relative humidity in the 35 to 50% range. Over 50% can promote mold and other bacterial growths. Below 35% can cause sore throats, sinus congestion, skin disorders, warps in wooden furniture and floors, separation in wood floors, and gaps in molding.
*If you live in a warmer, humid climate, be certain your air conditioning equipment is sized properly and ensure it’s in good working order for the best dehumidification. (If no air conditioning system is present, a dehumidifier can be a good option to maintain proper humidity in your home.) In colder climates, a humidifier may be used to increase humidity levels as needed.
*Have a precision tune-up performed on your heating and cooling system twice each year for maximum efficiency, comfort and safety.

Ventilation
Today’s modern homes are tightly sealed to keep conditioned air in and save energy. The problem is, without the right amount of fresh air, your home can become a breeding ground for pollutants. Fortunately, there are plenty of things you can do with the help of a Service Experts professional to improve ventilation in your home.

Here are just some of the many aspects of healthy ventilation you should be aware of when it comes to ensuring that your family can enjoy a healthy home:
*Have your kitchen/bathroom exhaust fans tested to determine if a back draft from another flue (such as your water heater or fireplace) is drawing carbon monoxide into your home.
*Contain your renovations to one room at a time.
*Seal and vent renovated rooms before continuing to the next project.
*Have an existing ventilation system properly maintained with regular service.
*Mechanical ventilation systems such as Heat Recovery Ventilators (HRV) and Energy *Recovery Ventilators (ERV) are balanced systems that bring in and filter the outdoor air while exhausting stale indoor air. These systems capture energy and use it to heat or cool the incoming air for greater energy efficiency and comfort.
*Rather than opening windows for ventilation, consider solutions that only allow filtered conditioned outside air to come indoors and help dilute any pollution in your home’s air.

Filtration
Another way to keep your home healthy is to clean the air by filtering out as many pollutants as possible.

A proper filtration system helps clean the air in your home:
*Determine the appropriate air filtration and cleaning equipment for the needs of your family. Service Experts can help educate you regarding various options so that you can choose the option that is best for the health of your home.
*Regardless of the options selected, an important step in good filtration is the constant recirculation of air throughout your home.
*Remove up to 97.5% of all airborne house dust in less than 24 hours, as well as 99.9% of all allergy causing pollen and spores, with an air cleaner.
*UV lights are an excellent problem solver in areas where bacteria or biological contaminants are a concern.
*UV lights can reduce and destroy biocontaminants by bathing them in high intensity UV.
For the complete filtration system, ask your Service Experts professional about the newest filtration and purification system –the photo catalytic purification system–which combines filtration of particles and bacteria as well as reduces odors.

**Courtesy of Service Experts - Expertise You Can Rely On - Guaranteed!

Chris Paulsen

Maintenance and Care

Annual maintenance will improve the efficiency and prolong the life of your equipment, and is often required to maintain your manufacturer’s warranty. Your equipment should only be serviced by a qualified service technician.
Caution: Do not perform any maintenance without turning OFF the power to the equipment.

Gas Furnaces

1. Permanent or disposable air filters should be cleaned and changed every two months during the heating and cooling seasons.
Note: For new homes, it is advisable to wash permanent filters once per month for the first year.
2. Check unit operation annually. Do not wait until you need heating! Annual maintenance is required to maintain the warranty.

Air Conditioners

1. After turning the power to the unit off, rinse outdoor coil annually with garden hose to remove dust, grass cuttings, etc.
2. Check unit operation annually. Do not wait until you need cool air! Annual maintenance is recommended.
Notes:
A. It is recommended that the thermostat be set no lower than 21ºC (70ºF) for cooling. Below this temperature, ice could form on the indoor coil, possibly resulting in damage to the equipment.
B. If ice forms on the connectors going into the indoor coil or outdoor unit, turn equipment off and call for service immediately!
C. In cooling mode, do not lower temperature setting on the thermostat unless the outdoor unit has been off for five minutes. The breaker will probably trip or a fuse may blow if you turn it on too soon.

Humidifiers

1. Turn humidistat to OFF position, then turn water supply off, and close humidifier damper every spring.
2. Turn water supply on, then turn humidistat to ON position, and open humidifier damper every fall.
3. Empty water reservoir on drum type every spring.
Notes:
A. Only operates when the furnace fan is running, and the humidistat is calling for humidity.
B. Acceptable humidity levels vary dependent upon outside temperature but they usually range between 30% and 50%.
C. Place conditioning tablets in water reservoir to prevent bacteria buildup.

Electronic Air Cleaners

1. Gently clean the electronic air plates every two months. Use approved cleaner.
2. Clean pre-filters every two months
Caution: To avoid improper operation, be careful not to bend plates

Media Air Cleaners

1. Replace or clean filters every two months. Some systems require the filter to be replaced more often, depending on environmental conditions. Filters may need to be changed more frequently in newly constructed homes, homes under renovation, or homes where several pets live. Call us for filter media.

Fresh Air Ventilation Systems

1. Check intake and exhaust filters monthly. If required, vacuum the filters, or rinse under a water tap. Mild detergents may be used, but do not use solvent cleaners.
2. Check the core every six months for dirt accumulation. If required, slide the core carefully out of the case. Clean the core with water and mild detergents only. Do not use solvents or other cleaning agents; the water temperature must not exceed 65ºC (150ºF). Do not use a high-pressure hose, and be sure to replace the core carefully. It must be properly aligned with the service instructions facing outward and the arrow up.
3. The drain pans should be wiped clean with water and mild detergents. Avoid solvent-based cleaners!
4. Set dehumidification control to summer setting or winter setting dependent on applicable season.
5. Check outside hood to make sure it is free and clear of debris.

Thermostats

Conventional type: This type of thermostat does not require any maintenance. Note: If the room is dark, a small blue flash may be noticed when heating or air conditioning comes on. This is normal.
Programmable / Electronic types: Annual replacement of batteries is necessary for proper operation where applicable.
Notes
A. This type of thermostat normally maintains the temperature within half of 1ºC, unlike conventional thermostats, which may vary up to 3ºC. The furnace or air conditioner may cycle more rapidly, especially under low load conditions. This is a normal operating condition.
B. Programmable thermostats can conserve energy and save you money.
C. Do not set back your temperature more than 3ºC. A temperature difference of more than 3ºC will not provide any savings.
Downloads
1f80-261 Programmable Electronic Digital Thermostat installation and operation instructions Download (204KB, PDF)
1f90-371 Thermostat ManualDownload (320KB, PDF)

Continuous Fan Operation

Definite advantages can be obtained by providing continuous fan operation, particularly with the use of fresh air ventilation systems, energy efficient air cleaners and power humidifiers. Today’s new and efficient motors can save you hundreds of dollars while providing better indoor air quality.

Home Comfort Products

Call us for home comfort products: Arpi’s Industries in Calgary 1-403-236-2444

STAY WARM - ENERGY EFFICIENT GAS FURNACES
Natural gas furnaces are up to 96% fuel efficient. They can save you a bundle and are also environmentally friendly, reducing the global greenhouse effect. Two stage firing and variable speed blowers are energy-saving features available on certain models.

STAY COOL - ENERGY EFFICIENT AIR CONDITIONERS
Use less fuel with a high efficiency air conditioner. The lower the decibel ratings, the quieter the equipment operates to conform to noise pollution regulations. Warm weather dehumidification! Energy Efficient! Dependable! Environment Savings!

STAY COMFORTABLE - HUMIDIFIERS
Proper humidity greatly lessens the instance and severity of respiratory infections and can reduce excessive heating due to improved comfort levels. Cut down your energy consumption with environmentally friendly controls. The acceptable humidity range is between 30% to 50%.
Recommended Relative Humidity should be 35%
Sahara Desert 25%
Death Valley 23%
Average Heated Home 13 to 16%

BREATHE EASIER - ENERGY EFFICIENT AIR CLEANERS
Help to decrease the effects of allergies and reduce illness by removing airborne dust, dirt, pollen and allergens from the air you breathe. Your high efficiency air cleaner will control your indoor environment and will continue to assist your ventilation system in providing cleaner, healthier air quality.

BREATHE CLEAN - QUALITY FRESH AIR SYSTEMS
Using the latest technology, HEPA filters help rid your home of stale, stuffy air and polluting particles. A true HEPA filter is 99.97% efficient at 0.3 microns, and can trap dust, dander and smoke particles to clean the air you breathe. A HEPA filter can also help eliminate contaminants released by household chemicals, building materials, carpets and furniture. A quality fresh air system is essential for healthy air because today’s homes are built relatively air tight. They are also important for removing excessive humidity and preventing potentially damaging condensation.

STAY SAFE - CARBON MONOXIDE DETECTORS
Guard against carbon monoxide (CO), a potentially hazardous chemical. Carbon monoxide is a colourless, odourless gas that is produced when any fuel is incompletely burned. A properly working CO detector can provide an early warning to you and your family before this potentially deadly gas builds up to a dangerous level. A CO detector is an inexpensive way to help insure your family’s safety and well being. CO detectors can be used as backup but not as replacement for proper use and maintenance of your fuel-burning appliances.

**Article courtesy of Arpi’s Industries Ltd. - your Calgary Home Comfort, heating, cooling, air conditioning and furnace specialist.